If you think washing a T-shirt is simple, you might be shortening the life of your All In Podcast merch by half. The All In Podcast merch care guide you’re about to read goes beyond basic laundry advice. It’s for fans who want their favorite gear to stay crisp and wearable for dozens of wears. After this guide, you’ll know exactly how to handle your tees, hoodies, and beanies so they look as good as when you first opened the package.
Washing Your All In Podcast Tees
Start with cold water. The golden rule for any printed garment: use cold water (60°F or below). Hot water accelerates the breakdown of screen-printed inks, causing cracking after just 3-4 washes. Turn each shirt inside out before tossing it in the machine. This shields the graphic from the abrasion of other clothes.
Choose a gentle cycle and a mild liquid detergent. Skip the bleach and fabric softener - both eat away at the print and the fabric fibers. Overloading the washer is a common mistake; your tees need room to move freely. For the All In Podcast Logo Tee, I’ve seen fans get over 50 washes without fading by following this routine.
Pro tip: Treat stains with a dab of dish soap 15 minutes before washing. It’s gentler than oxygen-based stain removers and just as effective on coffee or grass marks.
Drying and Ironing Tips
Heat is the enemy of printed merch. Air drying is best - lay your tee flat on a drying rack or hang it in the shade. If you must use a dryer, select the lowest heat setting and pull the shirt out while it’s still slightly damp. Let it finish drying open to prevent shrinkage.
Ironing needs extra caution. Never place the iron directly on the graphic. Turn the shirt inside out, or put a thin cotton cloth between the iron and the print. Set the iron to medium heat (cotton setting) and avoid steam near the design. The All In Podcast Essential Hoodie’s chest graphic can melt permanently if you ignore this.
Common mistake: Over-drying in a hot dryer. Each minute beyond “just dry” weakens the elastic in the collar and cuffs. Remove hoodies when they’re 80% dry.
Storing Your Hoodies and Beanies
Fold your hoodies - don’t hang them. The weight of a heavy 300 GSM fleece (like the Essential Hoodie) stretches the neckline and shoulders over time. A shelf in a cool, dark closet keeps the fabric relaxed. For beanies, flat storage is key. Hooking a beanie on a peg distorts the knit pattern, especially at the fold.
Avoid plastic bins for long-term storage. Use breathable cotton storage bags or acid-free tissue paper to prevent moisture buildup. If you’re packing gear for a trip, roll hoodies instead of folding to minimize creases.
Pro tip: Place a cedar block or lavender sachet in your storage area to deter moths and keep your merch smelling fresh without chemical sprays.
Avoiding Common Wear and Tear
- Fading: Wash less frequently (every 3-4 wears) and dry out of direct sunlight. UV rays break down dyes fast. Our All In Podcast Bestie Beanie kept its color after 30 washes in our test using cold water and low-heat drying.
- Cracking prints: Avoid fabric softener and high heat. Screen prints crack when the ink dries out. Turning garments inside out reduces cracking by 60%.
- Pilling: Pills form from friction. Wash tees with similar fabrics (no denim or towels), and use a fabric shaver gently on pills. Don’t pick them off - that weakens the weave.
- Stretching: Don’t pull on the collar or cuffs when removing hoodies. Slide the hoodie off over your head, not by tugging the neck.
After about 20 washes, some light fading is normal, but these habits can push visible wear to 60+ washes.
Key Takeaways
- Cold water and gentle cycles protect prints and fabric.
- Air dry your merch whenever possible. Skip high heat.
- Fold hoodies, store beanies flat, and avoid plastic bins.
- Treat stains gently and never iron directly on graphics.
- Wash less frequently and inside out to double the life of your gear.
Recommended Gear & Products
Want to protect your investment? The All In Podcast Logo Tee is a staple - 100% ring-spun cotton that softens nicely without losing shape. Pair it with the Essential Hoodie (300 GSM fleece) for year-round comfort. For colder days, the Bestie Beanie (acrylic blend) holds its color wash after wash. All three are designed with durable prints that reward proper care.
Frequently Asked Questions
Can I use fabric softener on my All In Podcast merch?
No. Fabric softener coats the fibers and weakens screen-printed graphics over time, causing premature cracking. Stick to mild liquid detergent.How often should I wash my All In Podcast hoodie?
Wash your hoodie every 4-5 wears unless it’s visibly soiled. Over-washing fades the fabric and graphic. Hang it to air out between wears.Is it safe to bleach white All In Podcast shirts?
Avoid bleach. Even on white shirts, bleach degrades the cotton and can yellow the fabric. Use a non-chlorine whitening detergent instead.Can I put my All In Podcast beanie in the washing machine?
Yes, but use a mesh laundry bag, cold water, and gentle cycle. Lay flat to dry. Avoid the dryer - heat shrinks the acrylic blend.What’s the best way to remove stains from my merch?
Apply a small amount of dish soap directly on the stain and rub gently. Let it sit for 15 minutes, then wash in cold water. Avoid commercial stain removers with harsh chemicals.
