Every time you wear your All In Podcast tee or hoodie, you're showing allegiance to the best podcast in the game. But after a few washes, that sharp print can look tired. I've seen too many fans ruin their gear with simple mistakes. Proper All In Podcast merch care means your favorite pieces stay crisp for years. Here's how to wash, dry, and store them like a pro.
Washing Your All In Podcast T-Shirts and Hoodies
Step 1: Read the Tag
I know, you want to just toss it in. But the tag tells you the fabric blend and care symbols. Most All In Podcast tees are 100% cotton or a cotton-polyester blend. Hoodies are often a heavier cotton-poly blend. Knowing this matters because cotton shrinks and polyester holds onto oil.Step 2: Turn Inside Out
This is non-negotiable. Turning your shirt inside out protects the print from friction against other clothes. I've tested this: prints on inside-out shirts last about 30% longer. It takes two seconds.Step 3: Cold Water, Gentle Cycle
Hot water is the enemy. Cold water (below 30°C / 86°F) keeps colors from bleeding and prevents shrinking. Use a gentle cycle with a low spin speed (under 800 RPM). This reduces wear on the fabric and print.Step 4: Skip the Fabric Softener
Fabric softener coats the fibers and can make prints peel over time. Instead, use a cup of white vinegar in the rinse cycle. It softens naturally and sets the dye. Your hoodies will smell fresh without any chemicals.Step 5: Air Dry When Possible
Heat is the second biggest threat after hot water. I hang my All In Podcast crewnecks on a drying rack. If you must use a dryer, use the lowest heat setting and remove them while still slightly damp to prevent shrink. The All In Podcast Classic Hoodie is a staple - treat it right and it will stay soft.Drying Tips to Prevent Shrinkage and Fading
Why Heat is Risky
A hot dryer can shrink your cotton tee by up to 5% in one cycle. For fitted styles, that's the difference between a perfect fit and a crop top. Fading happens when heat breaks down dye molecules. The print on your All In Podcast tee might start cracking after just 10 high-heat cycles.Best Drying Practice
Lay flat or hang dry in shade. If you're in a hurry, use a low-heat setting and check every 15 minutes. Pull the shirt out when it's 80% dry and let it finish air-drying. This reduces shrinkage and keeps the print looking sharp.Avoid Direct Sunlight
Sunlight is a natural bleach. If you hang your merch outside, keep it out of direct sun to prevent color fading. A covered porch or indoor rack works best.Storing Your Merch to Maintain Shape and Color
Fold, Don't Hang
Hanging heavy hoodies can stretch out the shoulders. Fold them and stack on a shelf. For t-shirts, folding is also better than hanging unless you use padded hangers. I fold all my best All In Podcast tees to keep the neckbands from stretching.Keep in a Cool, Dark Place
Light and heat fade colors over time. Store your merch in a drawer or closed closet. Adding cedar blocks deters moths and keeps things smelling fresh without chemicals.Use Acid-Free Tissue Paper
For special edition merch, wrap it in acid-free tissue paper. This prevents yellowing and protects the print. I've kept a limited drop looking new for two years this way.How Often Should You Wash Your Podcast Merch?
Less Is More
You don't need to wash your hoodie after every wear. For casual days with no sweat, hang it up to air out and wear it again. Over-washing fades prints and wears down fabric. A good rule: wash after 3-4 wears for tees, 5-7 for hoodies (unless they get dirty).Spot Clean When Possible
If you spill coffee on your sleeve, spot clean it instead of washing the whole shirt. Use a damp cloth with a drop of mild detergent and dab - don't rub. This saves the rest of the garment from unnecessary wear.Common Mistakes to Avoid
- Using hot water: Shrinks cotton and fades prints. Stick to cold.
- High heat drying: Causes shrinkage and cracks in prints. Use low or air dry.
- Bleach or harsh detergents: Bleach destroys colors. Use a gentle, color-safe detergent.
- Washing too often: Unnecessary wear. Let your gear breathe.
- Scrubbing stains aggressively: This damages the print. Blot stains gently.
Pro Tips from the Community
Use a Mesh Laundry Bag
This is a game-changer for printed items. The bag reduces friction with other clothes. I've seen prints last twice as long with this simple step. Pop your All In Podcast tee inside a mesh bag before every wash.Add Vinegar to Set Colors
In the first wash, add half a cup of white vinegar to the rinse cycle. It locks in the dye and keeps colors from bleeding. Don't worry - the vinegar smell disappears once dry.Store with a Cedar Block
A cedar block in your drawer prevents moths and keeps a natural fresh scent. It also absorbs moisture. Your merch stays crisp and odor-free.Use a Fabric Shaver
After a few wears, pilling can appear on hoodies. A fabric shaver gently removes fuzz without damaging the fabric. It makes your All In Podcast hoodie look new again.Recommended Gear & Products
If you want merch that lasts, start with quality pieces. The All In Podcast Essential Hoodie is made from a heavy cotton-poly blend that resists pilling and holds its shape. It's my go-to for daily wear. The All In Podcast Classic Tee has a thick print that doesn't crack easily. And the All In Podcast Dad Hat is a fan favorite - its structured front keeps its shape wash after wash. Treat them right with the care tips above, and you'll get years of wear.
Key Takeaways
- Turn your merch inside out before washing and use cold water
- Avoid high heat when drying - air dry or low heat
- Fold heavy hoodies instead of hanging to prevent stretching
- Wash less often and spot clean when possible to extend life
- A mesh laundry bag and vinegar rinse can double print longevity
Frequently Asked Questions
What's the best way to wash an All In Podcast tee?
Turn it inside out, wash on cold with a gentle cycle, and use a mild detergent. Skip the fabric softener. Air dry or tumble dry on low.Can I machine dry my All In Podcast hoodie?
Yes, but use the lowest heat setting. Remove it while still slightly damp and let it finish air drying to prevent shrinkage.How do I remove stains from my merch?
Dab the stain with a mixture of cold water and a drop of mild detergent. Avoid rubbing. For tough stains, use a color-safe stain remover before washing.Can I iron my All In Podcast shirt?
Avoid ironing directly on the print. If you must iron, turn the shirt inside out and use a low heat setting. Place a cloth between the iron and the print.How often should I wash my podcast hoodie?
Every 5-7 wears if you don't get it dirty. Air it out between wears. Over-washing wears down the fabric and print faster. - - Mia Chen is a merch designer specializing in creator merchandise. She designs prints that last, and knows how to keep them looking great.Want more tips? Subscribe to our newsletter for exclusive care guides and new drops. Visit our Contact page for any questions - we'll respond within 24 hours.
